Product Center

Product Center

PHF-J series Static Flow Balancing Valve

PHF-J

Model Selection Description




Order No. Model No. Connection type DN Kvs(l/h) Dimensions
A B C
14104 PHF-J-X15L Thread type Dn15 3 G1/2 67 143
14105 PHF-J-X20L Thread type Dn20 4.4 G3/4 76 148
14106 PHF-J-X25L Thread type Dn25 7.5 G1 89.5 154
14107 PHF-J-X32L Thread type Dn32 12 G1-1/4 103 165
14108 PHF-J-X40L Thread type Dn40 17 G1-1/2 123 173.5
14109 PHF-J-X50L Thread type Dn50 26 G2 144 192
14110 PHF-J-S15L Thread type Dn15 3 G1/2 76 117
14111 PHF-J-S20L Thread type Dn20 4.4 G3/4 83 125
14112 PHF-J-S25L Thread type Dn25 7.5 G1 97 135
14113 PHF-J-S32L Thread type Dn32 12 G1-1/4 110 143
14114 PHF-J-S40L Thread type Dn40 17 G1-1/2 129 150
14115 PHF-J-S50L Thread type Dn50 26 G2 153 170
14116 PHF-J-Z15L Thread type Dn15 3 G1/2 67 116
14117 PHF-J-Z20L Thread type Dn20 4.4 G3/4 76 122
14118 PHF-J-Z25L Thread type Dn25 7.5 G1 89.5 127
14119 PHF-J-Z32L Thread type Dn32 12 G1-1/4 103 139
14120 PHF-J-Z40L Thread type Dn40 17 G1-1/2 123 147.5
14121 PHF-J-Z50L Thread type Dn50 26 G2 144 167
14122 PHF-J-65F Flange type Dn65 118 ø65 305 244
14123 PHF-J-80F Flange type Dn80 140 ø80 306.5 267
14124 PHF-J-100F Flange type Dn100 265 ø100 356 268
14125 PHF-J-125F Flange type DN125 480 ø125 445 272
14126 PHF-J-150F Flange type DN150 650 ø150 525 294




Features

Body material

DN15-DN50 brass,

 DN65-DN150 gray cast

最大工作压力 16bar
工作范围 -20~120℃
介质 水及乙二醇溶液,乙二醇≤50%
精确度 ±10%
密封材料 EPDM
刻度 DN15~50,0~6
DN65~150,0~7



简介

Static flow balancing valves is used in hydraulic system. It can balance the flux in the end or every branch in the system accurately. Water system's balance is the premise for normal operation. The system can provide maximum comfort and the least energy consumption in this premise. Screw connection valves' body adopts Venturi flow meter. It makes the flow regulation be more accurate and the flow monitor be more convenient.




Operational Principle And Advantages

Balancing valve is used to adjust the medium flux which flow through the valve body. Balance valve's shaft moves up and down after turning regulating valve's handle to adjust the flow diameter and change the curve feature.Depending on the  differential pressure which is measured by the equipped pressure testing port can test and adjust the flux.
        Features:
       1.System's terminal can operate under heating,refrigeration and arefaction. It will not cause energy waste and the comfort can be 
           ensured.
       2.Pump works at the best position.And there is no overheat or wastage.
       3.No noise and pipe corrosion.
       4.Temperature adjustment valve always works under normal differential pressure range.



 Static Balancing Flow Tester

        

PHF-J-TSY01 static balancing valve flow tester is used to the static balancing valve system's flow debugging.Equipped With the PHF-J series Hengsen static balancing valve can  measure system pressure and differential pressure. And calculate the current flow automatically according to valve laps which is set by the user.Automatically calculate the quantity of the valve laps which need to opened , change the previous trouble of manual inquiry the flow curve , and reduce the calculation error.Greatly improves the efficiency and accuracy of the static balancing valve system flow debugging.
Operator interface design with Chinese and English .Recharge or replace the lithium battery power supply, water and electricity separation, handheld operation, with backlight large digital display, compact and portable, adapt the complex scene debugging.